PayPal Acceptance Mark
Free shipping on orders over $99!

Power Brushes

Displaying 1 to 35 (of 35 products) Result Pages:  1 
       Product Information   Price 
   Cen-Tec CT-14DXQD Quiet Drive Electric Power Brush 

Cen-Tec CT-14DXQD Quiet Drive Electric Power Brush

Model #: PB411

* Free shipping on your entire order when you purchase this product!


Cen-Tec has long been known for it's reliability and performance. The Cen-Tec CT-14DXQD Quiet Drive Electric Power brush is no exception. The Cen-Tec CT14DXQD power brush is the exact same power brush as the Hayden SuperPack Power brush as well as being used by Vacuflo as the Electroglide power brush, Whirlpool, Nutone CT600, Nutone BN190-02, Panasonic, and many others central vacuum manufacturers under their own label but has a NEW designed brush roll and belt drive for more quiet performance and much, much more cleaning efficiency! Not to mention a NEW more powerful motor! Sturdy and this reliable 14" wide brush is equipped with a timing belt driven agitating roller brush and a reset button to protect against stalls. This means many years of trouble free service. It has a full wrap around bumper to protect your base boards and furniture from scratches and mares. With a quick release latch and a four level height adjustment it is very easy to use. In addition it has a full faced light bar to illuminate darkened areas such as closets and under beds.

DO NOT ACCEPT THE OLDER CT14DX BRUSH!

We sell only the NEW Cen-Tec CT14DXQD that replaced the older CT14DX which is no longer made.

The CT14DXQD will work with all CT14DX equipment and will connect up perfectly!

Need a complete kit? For better value using the Cen-Tec CT-14DXQD power brush see our Cen-Tec Deluxe Pack part #CK319, which contains our XZ Dual Voltage Hose and all the tools you will need and gives you the best value.

If you need a replacement beltsee our part #PB622.

If you need a replacement headlight bulb see our part #PB620.

$165.99

Qty:  

   Cen-Tec CT-18DXQS QuietDrive Power Brush 

Cen-Tec CT-18DXQS QuietDrive Power Brush

Model #: PB406

* Free shipping on your entire order when you purchase this product!


The Cen-Tec CT18DXQS QuietDrive Power Brush is a real workhorse. Sturdy and this reliable 14" wide brush is equipped Cen-Tec exclusive Dirt Sensor system that let's you know when the area is clean.

The CT-18DXQS is equipped with a timing belt driven agitating roller brush and a reset button to protect against stalls. This means many years of trouble free service. It has a full wrap around bumper to protect your base boards and furniture from scratches and mares. With a quick release latch and a four level height adjustment it is very easy to use. In addition it has a full faced light bar to illuminate darkened areas such as closets and under beds.

In addition incorporated in the power head is a dirt sensor (see picture) letting letting you know when the area is clean. The "RED" means the dirt is still passing through the wand, the "GREEN" means the area is clean and free of dirt.

Sophistication, performance, and quality, that is the Cen-Tec reputation.

Requires the Dirt Sensor wand.

If you need a replacement belt see our part #PB622.

$189.99

Qty:  

   Hayden SuperPack Power Brush 

Hayden SuperPack Power Brush

Model #: PB407

* Free shipping on your entire order when you purchase this product!


This has been Hayden's best selling power brush for many years. It connects directly to the Hayden SuperHose and includes the Hayden SuperLatch wands. Also includes a headlight for illumination. Comes in Ivory or Grey.

If you only need an electric hose see part #HO390.

If you need a replacement belt and the belt is cogged see our part #PB602.

If your belt is smooth see our part #PB622.

If you need a replacement headlight bulb see our part #PB620.

$199.99

Qty:  


Available Options:

Color:

   Cen-Tec CT-20DXQS  Power Brush with Dirt Sensor 

Cen-Tec CT-20DXQS Power Brush with Dirt Sensor

Model #: PB410

* Free shipping on your entire order when you purchase this product!


This Cen-Tec CT20DXQS power brush has the exclusive Cen-Tec Dirt Sensor on the power brush which incorporates in the power head is a dirt sensor (see additional picture) letting letting you know when the area you are vacuuming is clean. The "RED" means the dirt is still passing through the wand, the "GREEN" means the area is clean and free of dirt.

Cen-Tec has long been known to manufacture the finest vacuum power brushes and accessories available. The Cen-Tec CT-20 Power Brush is used by many central vacuum manufacturers as their own power brush such as Hayden, VacuMaid, NuTone, M & S Systems, AirVac, Panasonic, Galaxie as well as other brands. It utilizes the QuietDrive belt system that is multi-grooved interwoven with Mylar fibers that won't scratch or fatigue providing longer life, no slippage and a low noise level.  

Sophistication, performance, and quality, that is the Cen-Tec reputation.

Requires a sensored wand to operate. To purchase the wand see our part#WA122. Be sure to check "sensored" in the drop down.

If you need a replacement belt see our part #PB621.

Need a complete kit? For better value using the Cen-Tec CT-20 power brush see our Cen-Tec 3-in-One Estate Pack part #CK332, which contains our new 3200 Series Dual Voltage Hose and all the tools you will need and gives you the best value.

If you need an electric hose see part #HO102 or #HO103.

If you need a replacement belt see our part #PB621.

$189.99

Qty:  

   Wessel Werk EBK340 Electric Power Brush With Headlight 

Wessel Werk EBK340 Electric Power Brush With Headlight

Model #: PB404

* Free shipping on your entire order when you purchase this product!


This is one of the finest power brushes available today! The Wessel Werks EBK340 14" power brush is unsurpassed in performance and reliability. Uses the largest commercial grade motor available and uses the "Never-Fail" cogged fiberglass reinforced belt for long lasting performance. Non marking wheels and pivot/swivel neck for greater flexibility. The roller brush rotates at 6000 RPM, that's twice as fast as most power brushes providing your with far greater cleaning ability. Using double row chevron designed roller brushes that channels the air to draw the dirt from the outer edges of the roller brush into the center of the power head. Unlike other power brushes that require manual height adjustment the PowerMaxx Power Brush is self adjusting to most carpet surfaces. It has a forward mounted fluorescent headlight for better visibility under beds, in closets, and other dark areas. Not recommended for shag or high cut carpets.

 

If you need a replacement belt see our part #PB615.

$246.99

Qty:  

   TurboCat Zoom EX with Z-Tech Design 

TurboCat Zoom EX with Z-Tech Design

Model #: PB102

* Free shipping on your entire order when you purchase this product!


You'll love the sleek contemporary look and design of the new TurboCat Zoom EX air turbine power brush. But most of all you'll love the performance! It removes deeply embedded dust and dirt more effectively. Maneuver with ease under and around furniture while enjoying the peace and quiet. The exclusive Z-Tech Design delivers these remarkable benefits and much more.

There's never been a quieter, more powerful air turbine powerhead than the TurboCat Zoom EX.

 If you need a complete kit with hose and all the attachments? See our Cen-Tec Premier Turbine Kit part #CK315.

Features:

  • Exclusive Vac-N-Groom spiral designed roller brush that features dual height bristles for more thorough cleaning.
  • Multi-port base plate and expanded air intake improves vacuum power and cleaning performance.
  • Soft Pro-Tech bumper protects furniture from damage.
  • Easy-glide front rollers improve maneuverability. 
  • Run-silent bearing isolators and silent drive, non-slip belt ensures quieter operation.
  • Sleek low profile and a 13" wide vacuum path provides edge-to-edge cleaning ability.
  • Self-adjusting, non-slip drive belt reduces vibration and noise.

If you need a replacement belt see our part #PB632. Available in Onyx, Platinum or Sapphire Blue.

$118.99

Qty:  


Available Options:

Color:

   Ultra TP-210 TurboCat Air Turbine Brush 

Ultra TP-210 TurboCat Air Turbine Brush

Model #: PB100

This is the original Ultra TP-210 power brush. Perfect for homes with limited carpet or area rugs. The power of the Ultra TP-210 (aka TurboCat, TL-2000 and TP-210) air turbine system is more than capable of handling your limited carpet and rug cleaning tasks. Try this system in your home today, you won't be disappointed!

Available in grey or black.

Need a complete kit with hose and attachments? See our Cen-Tec Deluxe Turbine Pack part #CK309.

If you need a replacement belt see our part #PB210.

Available in Black or Grey.

 

$98.99

Qty:  


Available Options:

Color:

   TK-284 Air Turbine Carpet Brush 

TK-284 Air Turbine Carpet Brush

Model #: PB211

The TK284 is a new and sleek new design that is the direct replacement for the TK-270 but vastly improved! Also known as the TT-27 this air turbine vacuum brush has a large clean-out door for easy maintenance, rubber bumper guards to protect your fine furniture and a Teflon squeegee blades to seal it off for increased airflow for better cleaning. Works great for limited carpeted homes.

FITS 1.25" SIZE WANDS AND HOSES ONLY.

If you need a replacement belt see our part #PB201.

$27.99

Qty:  

   AirMaxx Turbo Power Vacuum Brush 

AirMaxx Turbo Power Vacuum Brush

Model #: AT418

The AirMaxx Turbo Power Vacuum Brush is the most powerful and effective turbo brush available! It spins 24 blade turbine fan at an amazing 8000 RPM for maximum cleaning. This tool works great on stairs, upholstery, your carpet in the car and picks up dirt and pet hair with ease. Has the most powerful air turbine produced that spins at incredible speed that expedites any cleaning job you may have.

This turbine is driven by a cogged belt for secure non-slipping operation that is attached to a roller brush that is sealed away from dirt and debris that protects your belt from unnecessary exposure ensuring longer belt life.

It has a floating bottom plate that contours itself to your cleaning job as well as a rotating neck for side to side action to accommodate you cleaning needs. The bottom panel opens up for easy cleaning and maintenance. It's like having an upright vacuum cleaner in your hand!

Has a 6 1/2 inch wide cleaning path.

 

CLEANS BETTER THAN ANY OTHER AIR TURBINE TOOL AVAILABLE!

$26.99

Qty:  

   Rugrat Mini Air Turbine Brush 

Rugrat Mini Air Turbine Brush

Model #: AT420

The Rug Rat Turbine Brush with the exclusive TurboFlex agitator gives you the same powerful cleaning performance as its big brother the Ultra TP-210 turbine floor brush but is used for smaller, tighter areas. A versatile cleaning attachment for upholstery, carpeted stairs or auto interiors. Has a swivel neck that rotates 360 degrees for easy use.

Comes in grey or black.

If you need a factory replacement belt see our part #PB204.

 

$46.99

Qty:  


Available Options:

Color:

   Belt for a PowerMaxx Power Brush, Beam Serenity, Bosch, Wessel-Werk EBK340, EBK360, and Vacuflo 9190 Power Brush 

Belt for a PowerMaxx Power Brush, Beam Serenity, Bosch, Wessel-Werk EBK340, EBK360, and Vacuflo 9190 Power Brush

Model #: PB615

Factory replacement cogged belt for PowerMaxx Electric Power Brush. Fits Beam Serenity CV-30, Bosch, Wessel-Werk EBK340,EBK360, and Vacuflo 9191 power brush too.

Belt measures 3/8 inches wide and 4 1/2 inches long when flattened out.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

$18.99

Qty:  

   Belt for Cen-Tec CT-20DXQD or CT-20DXQS Series Power Brush 

Belt for Cen-Tec CT-20DXQD or CT-20DXQS Series Power Brush

Model #: PB621

Factory replacement belt for the Cen-Tec CT20DXQD or CT20DXQS Series Power Brush. This is a reinforced V-Grooved belt that wears exceptionally well and provides continuous power to your CT-20 Series Quietdrive Power Brush.

Belt measures 5/16 inches wide by 5 1/4 inches long flattened out.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

$16.99

Qty:  

   Belt for Cen-Tec CT-14DXQD, CT-18DXQD, CT-18DXQS Series and Ace Power Brush<small><sup>TM</sup></small> 

Belt for Cen-Tec CT-14DXQD, CT-18DXQD, CT-18DXQS Series and Ace Power BrushTM

Model #: PB622

Factory replacement belt for the Cen-Tec CT14DXQD, CT18DXQD, CT18DXQS Series Power Brush and the Ace Electric Power Brush TM from MD ManufacturingTM.

This is a smooth reinforced V-Grooved belt that wears exceptionally well and provides continuous power to your CT14 and CT18 Series Quietdrive Power Brush.

This belt measures 5/16 inch wide and 5 5/8 inches long when flattened out.

If your old belt is cogged and you need a replacement belt see our part #PB602.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

$17.99

Qty:  

   Belt for Cen-Tec CT-14, CT-16, CT-18 Series and Hayden SuperPack Power Brush 

Belt for Cen-Tec CT-14, CT-16, CT-18 Series and Hayden SuperPack Power Brush

Model #: PB602

Factory replacement belt for Hayden SuperPack HM 7500 (HAY300 and HAY203), Cen-Tec CT14, CT16, and CT18 Series or Panasonic power brushes with a cogged belt.

Fits only brush roll style with cogged belt.

Many Cen-Tec products were sold under the name brands AirVac, Beam, Galaxie, Nutone, M & S, Panasonic, Vacuflo Electroglide, Vacumaid and Whirlpool as well as many others. To check look on the bottom of your power brush for the name of the manufacturer.

This cogged belt measures 5/16" wide, 5 3/4" long when flattened out.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

$5.99

Qty:  

   Belt for Cen-Tec CT-12 Series Power Brush 

Belt for Cen-Tec CT-12 Series Power Brush

Model #: PB623

Factory replacement belt for the Cen-Tec CT12 Series Power Brush including the CT-12DX and the CT-12DXC.

This is a reinforced flat belt that wears exceptionally well and provides continuous power to your CT-12 Series Power Brush.

Belt measures 9/16 inches wide and 3 5/8 inches long when flattened out.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

$11.99

Qty:  

   Belt for Cen-Tec CT-210 Series and Black Hawk II Power Brush 

Belt for Cen-Tec CT-210 Series and Black Hawk II Power Brush

Model #: PB624

THESE BELT ARE IN LIMITED INVENTORY SO BUY THEM NOW AS THEY ARE NO LONGER MADE!

 

Factory replacement belt for the Cen-Tec CT210 Series Power Brush as well as the new 12 inch Blackhawk II power brush from MD Manufacturing TM that has a see through window to the roller bar and a headlight. Also fits some Air Vac models. This is a reinforced flat belt that wears exceptionally well and provides continuous power to your CT-210 Series Power Brush.

Belt measures 5/8 inches wide and 3 3/4 inches long when flattened out.

For belts to the original model of the Black Hawk power brush with no headlight by MD Manufacturing see our part #PB601.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

 

$6.99

Qty:  

   Belt for Wessel-Werk EBK290 and Eagle Power Brush 

Belt for Wessel-Werk EBK290 and Eagle Power Brush

Model #: PB603

Factory replacement belt for Wessel-Werk EBK290 and Eagle Power Brush from MD Manufacturing.

This belt is cogged and measures 7/32" wide and 4 inches wide flattened out.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

$9.99

Qty:  

   Belt for TurboCat Series Air Turbine Brush 

Belt for TurboCat Series Air Turbine Brush

Model #: PB210

Factory replacement belt for TurboCat II, TurboCat Ultra TP-210, TurboCat TL-2000, and the TurboCat T-210 Air Turbine Brush. All belts for these systems are the same.

The belt measures 9/32" wide and 6 1/16 inches long and is cogged.

If you need a replacement belt for the TurboCat Zoom or TurboCat Zoom EX see our part #PB632.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

$6.99

Qty:  

   Belt for TT-27, TK-270, TT-270 and Miele Air Turbine Carpet Brush 

Belt for TT-27, TK-270, TT-270 and Miele Air Turbine Carpet Brush

Model #: PB201

Factory replacement belt for TT27, TK270, TT270, Wessel-Werk 2700 or Meile Turbo air turbine carpet brush.

Belt measures 5/32" wide and 4 3/8" long and is cogged.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

$7.99

Qty:  

   Belt for Rug Rat, T-21 and T-22 

Belt for Rug Rat, T-21 and T-22

Model #: PB204

Factory replacement belt for Rug Rat air turbine tool. Also fits T21 and T22.

This belt measures 1/4" wide and 3-7/8 inches long when flattened out and is cogged.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

$7.99

Qty:  

   Belt for TK-2, TK-4, and TT-132 Twin Turbo Brush 

Belt for TK-2, TK-4, and TT-132 Twin Turbo Brush

Model #: PB200

Factory replacement belt for the TK2, TK4 and the TT132 that measures 3/16" wide and 4 5/16" long when flattened out and is cogged.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

 

$11.99

Qty:  

   Roller Brush for a Beam Serenity, Bosch, PowerMaxx and Wessel-Werk EBK340 Power Brush 

Roller Brush for a Beam Serenity, Bosch, PowerMaxx and Wessel-Werk EBK340 Power Brush

Model #: PB616

Factory replacement roller brush for PowerMaxx and Premier PowerMaxx Electric Power Brush. Also fits the Bosch, Beam Serenity and Wessel-Werk EBK340 power brush.

Measures 13 inches long.

It is highly advised that when you replace the roller brush you replace the belt for the best performance and life of the power brush.

To order a replacement belt see our part #PB615.

$49.99

Qty:  

   Hayden, Panasonic, Powermate, and Cen-Tec CT-14 Series Roller Brush 

Hayden, Panasonic, Powermate, and Cen-Tec CT-14 Series Roller Brush

Model #: PB613

Factory replacement roller brush Hayden HM 7500, Panasonic and Cen-Tec CT-14 Series Power Brushes as well as Vacuflo Electroglide and Sears Kenmore Powermate. Comes complete with metal end bushings and the beater bar and bristles.

It is highly advised that when you replace the roller brush you replace the belt for the best performance and life of the power brush.

To order the replacement belt see our part #PB602.

 

FACTORY NO LONGER AVAILABLE!

FOR THE NEW FACTORY REPLACEMENT SEE OUT PART #PB648

Obsolete

   Roller Brush for the Thermax, Cen-Tec CT-110 and Blackhawk Power Brush 

Roller Brush for the Thermax, Cen-Tec CT-110 and Blackhawk Power Brush

Model #: PB612

Factory replacement roller brush for the Thermax, Cen-Tec CT-110 Power Brush. Also fits MD Manufacturing's original Blackhawk power brush (has no headlight).

If you need a roller brush for the BlackHawk II that has a see through widow to the roller bar and a headlight, see our part #PB627.

It is highly advised that when you replace the roller brush you replace the belt for the best performance and life of the power brush.

To order the replacement belt see our part #PB601.

 

$55.99

Qty:  

   Roller Brush for Ultra TP-210 Air Turbine Brush 

Roller Brush for Ultra TP-210 Air Turbine Brush

Model #: PB213

Factory replacement for Ultra TP210 Air Turbine Roller Brush. Also fits TurboCat, TL-2000, TP-210.

It is highly advised that when you replace the roller brush you replace the belt for the best performance and life of the power brush.

To order the replacement belt see our part #PB210.

$59.99

Qty:  

   Hayden Pigtail Cord for Hayden SuperHose 

Hayden Pigtail Cord for Hayden SuperHose

Model #: PB617

These Hayden pigtail cords fit the Hayden SuperHose II.

Comes in either 6 foot or 10 foot lengths.

Available in black only.

$18.99

Qty:  


Available Options:

Cord Length:

   Air Turbine for Ultra TP-210 Air Turbine Brush 

Air Turbine for Ultra TP-210 Air Turbine Brush

Model #: PB214

Factory replacement for Ultra TP210 Air turbine power heads.

This air turbine also fits the TL-2000, T210, Ultra TP210 and TurboCat systems.

 

$49.99

Qty:  

   Swivel Neck for a TK-270 or TT-27 Brush 

Swivel Neck for a TK-270 or TT-27 Brush

Model #: PB208

Factory swivel neck replacement for the TK270 or TT27.

$15.95

Qty:  

   Elbow Neck for Ultra TP-210 Air Turbine Brush 

Elbow Neck for Ultra TP-210 Air Turbine Brush

Model #: PB215

Factory replacement elbow neck for Turbo Cat T-210. Also fits TurboCat, TL-2000 and TP-210. Does not include any other parts.

Available in grey or black. Grey is shown.

$21.99

Qty:  


Available Options:

Color:

   Rubber Bumper for Ultra TP-210 Air Turbine Power Brush 

Rubber Bumper for Ultra TP-210 Air Turbine Power Brush

Model #: PB216

Factory replacement rubber bumper for Ultra TP-210, TurboCat, TL-2000, and T210 Air Turbine Power Brush.

$13.99

Qty:  

   Electric Motor for Beam Serenity, Bosch Premium, PowerMaxx Power Brush and Wessel-Werk EBK340 Power Brush, 120 volt. 

Electric Motor for Beam Serenity, Bosch Premium, PowerMaxx Power Brush and Wessel-Werk EBK340 Power Brush, 120 volt.

Model #: PB614

New factory replacement 120 volt motor for the PowerMaxx electric power brush. Also fit the Beam Serenity, Bosch Premium Electro Duo and Premium Prestige Series as well as the Wessel Works EB340 power brush. Fits all PowerMaxx power brushes too.

We suggest you also purchase a new replacement belt for longer life. To order a replacement belt see our part #PB615.

$89.99

Qty:  

   Motor for Hayden SuperPack, Cen-Tec CT-14 and CT-16 Power Brushes, 120 volt. 

Motor for Hayden SuperPack, Cen-Tec CT-14 and CT-16 Power Brushes, 120 volt.

Model #: PB618

This is an original factory 120 volt motor that fits all Hayden SuperPack and most Cen-Tec power brush heads. It usually has the number 118139 printed on it. This includes Cen-Tec models CT-14L, CT-14DX, CT-16DX as well as many other power heads sold by Hayden, Vacu-Maid, NuTone, M&S Systems, AirVac, Panasonic, Vacuflo Electroglide, Galaxie as well as other brands. Cen-Tec manufactures many power brushes for central vacuum manufacturers. Check the bottom of your power brush to see the manufacturer.

This motor has a geared pulley. Be sure your motor has the same.

We suggest you also purchase a new replacement belt for longer life. To order the replacement belt see our part #PB602.

$49.99

Qty:  

   Motor for Cen-Tec CT-210 Power Brush, 120 volt 

Motor for Cen-Tec CT-210 Power Brush, 120 volt

Model #: PB625

This is a factory 120 volt replacement 120 volt motor for the Cen-Tec CT-210 Series Electric Power brush.

We suggest you also purchase a new replacement belt for longer life. To order the replacement belt see our part #PB624.

$52.99

Qty:  

   Hayden, Beam Rugmaster Plus and Cen-Tec Power Brush Replacement Bulb 

Hayden, Beam Rugmaster Plus and Cen-Tec Power Brush Replacement Bulb

Model #: PB620

This is a factory replacement light bulb for the Hayden 7500 Power Brush. Also fits most Cen-Tec power brushes including CT-12DXL, CT-14L, CT-14DX, CT-16DX, CT-18DXQD, CT-18DXQS, CT-20DXQD, and CT-20DXQS and Beam Rugmaster Plus.

Sold under many other brand names such as Hayden, VacuMaid, NuTone, M&S Systems, AirVac, Panasonic, Galaxie as well as other brands. Cen-Tec manufactures many of these power brushes for these central vacuum manufacturers. Look on the bottom of your power brush to see the manufacturer.

$4.99

Qty:  

   Replacement Bulb for Cen-Tec CT-210 Power Brush 

Replacement Bulb for Cen-Tec CT-210 Power Brush

Model #: PB322

This is a factory replacement bulb for the Cen-Tec CT210 Power Brush. These power brushes were sold under many other names, so check on the bottom of your ppower brush for the manufacturers name.

$8.95

Qty:  

Displaying 1 to 35 (of 35 products) Result Pages:  1 

Call Toll Free: 1-866-724-1806

Hours of Operation:

Mon - Fri: 8:00am - 5:00pm EST

Categories

BizRate Customer Certified (GOLD) Site
Vacuum Dealers Trade Association Member