| |
|
Product Information |
Price |
| |
 |
Model #: HP107
You can replace your open bag filter system to a closed bag system by using this adapter and connecting it with part #PF105, 45 Degree Spigot "L".
This creates a sealed bag system that easier to remove and replace. No more dirty open filtered bags. |
|
|
| |
 |
Model #: HP104
Our 35 foot cord connects a power brush to a non-electric hose. One ends plugs into a electrical receptacle and the other end to your power brush.
We suggest you purchase a hose sock part #AT301 to keep the cord snugly against the hose.
In addition you will need to purchase a set of extension wands with button locks part #WA115 to keep the power brush connected to the wands and the cord securely out of the way. |
|
|
| |
 |
Model #: HP200
Gas Pump style handle fits our electric vacuum hoses and comes complete with metal stub tube and is designed for a three way rocker switch which is NOT included.
Comes in grey or black.
To purchase the switch see our part #HP301.
Switch is pictured below. May not be compatible with all hoses.
Will not fit a Beam hose. |
|
|
| |
 |
Model #: HP201
Pistol Grip style handle fits our electric vacuum hoses and comes complete with metal stub tube and is designed for a three way rocker switch which is NOT included.
To purchase the switch see our part #HP302.
Switch is pictured below. May not be compatible with all hoses. |
|
|
| |
 |
Model #: HP406
This is a factory replacement hose handle with switch for the Beam Rugmaster Plus Power Team hose.
Comes complete with handle and switch.
This handle fits the dark gray hose with this style of handle ONLY!
Be sure to compare your hose handle with the one in the picture!
Will fit the two prong cord. If you have a three prong cord you will need to purchase the three prong adapter, our part # #HP401.
SPECIAL NOTE:
IF YOUR HOSE AND HOSE HANDLE ARE A LIGHT GRAY COLOR THIS HANDLE WILL NOT WORK!
Look at these two additional images below and compare them with yours. You will need to buy each one of them separately, they DO NOT COME AS ONE UNIT!
For the replacement Gas Pump style handle see our part #HP200.
For the replacement switch for the Gas Pump style handle see our part #HP301.
Please also look at part #HP410. This fits some Beam Rugmaster hoses as well.
|
|
|
| |
 |
Model #: HP410
This is a Beam factory replacement part #170406 for the Gas Pump Style Hose Handle and Switch for a Beam dual voltage hose.
This handle and switch fits only Beam products. This may fit some Rugmaster hoses. Please look closely at the pictures and compare them with yours.
Includes gas pump hose handle and switch, no other other parts are included. |
|
|
| |
 |
Model #: HP206
This is a replacement handle for the XZ Dual Voltage Hose. This will work on either the direct connect or corded style hose. Comes complete with a new switch.
If you need only the switch see our part #HP207.
|
|
|
| |
 |
Model #: HP411
This Cen-Tec Soft grip hose handle replaces the Hide-A-Hose handle on all Hide-A-Hose systems.
Soft to the touch and ergonomically designed for easier use and less strain on your wrist and is of much better quality that the Hide-A-Hose handle and fits perfectly!
There is no switch on this hose handle. |
|
|
| |
 |
Model #: HP412
This handle fit all 3200 Series hoses including the dual voltage and the low voltage hose.
Choose either with button lock or without.
All dual voltage hose require the button lock system.
Does NOT include switch!
For the replacement switch for the 3200 Series Dual Voltage hose handle see our part #HP304.
For the replacement switch for the 3200 Series Low Voltage hose handle see our part #HP309. |
|
|
| |
 |
Model #: HP415
This is the strain relief webbing just behind the handle on the 3200 Series Dual Voltage, Low Voltage and Standard hoses. Keeps the hose from kinking and splitting the hose just behind the handle.
Simply remove your handle, replace the webbing and your up and running again.
See additional images to identify your hose handle. Be sure it matches. Will NOT fit any other hose or handle other that the 3200 Series hoses. Does not comes with handle or switch, just the strain relief webbing only. |
|
|
| |
 |
Model #: HP202
Handle for Low Voltage vacuum hose with On/Off switch. Includes metal stub tube and bleeder valve for suction adjustment.
Choose from friction lock or button lock style.
Switch is NOT included. To purchase a switch see our part #HP303.
Switch is pictured below.
May not be compatable with all hoses.
ATTENTION VACUFLO OWNERS: Hose DOES NOT WORK WITH 4940 STYLE VALVES. Our hose does not have two metal connection pins on the wall end of the hose. |
|
|
| |
 |
Model #: HP203
This Curved Wand Vacuum Hose end with swivel cuff and bleeder valve fits basic hoses with no switch. Tightens counter-clockwise and to secure it use a dab of common household glue on the threads.
Available in friction lock or button lock style handle end.
Choose from beige (shown) or grey. |
|
|
| |
 |
Model #: HP413
The curved wand vacuum hose end with bleeder valve fits 1 1/2 inch hoses. The Chrome Curved End swivels 360 degrees so your hose never kinks and is sized at 1 1/4 inch to accommodate most vacuum tools and wand sets. It also features a bleeder valve that adjusts the degree of suction you want for vacuuming draperies, upholstery, etc.
Installs easily by screwing counter-clockwise on to your 1 1/2 inch hose.
Please allow 24-48 hours for custom hose fittings to assembled. |
|
|
| |
 |
Model #: HP210
The curved wand vacuum hose end with bleeder valve fits 1 1/4 inch hoses. Is made of durable ABS and is black in color and swivels 360 degrees so your hose never kinks. It features a bleeder valve that adjusts the degree of suction you want.
Measures 11 1/4 inches long and the cuff end measures 1 3/4 inches outside diameter. The other end of the wand measures 1 1/8 inches outside diameter.
This is the same curved wand end that is used on our HO100 Stretch Hoses.
Installs easily by screwing counter-clockwise on to your 1 1/4 inch hose. |
|
|
| |
 |
Model #: HP414
This is designed to replace the button lock your hose or wand that currently has a button lock system. |
|
|
| |
 |
Model #: HP205
This stub tube is for the XS Series hose. It has button locks at both ends for secure attachment and a bleeder valve for suction control. |
|
|
| |
 |
Model #: HP208
This stub tube is for the XZ Series hose.
It has a button lock on one end to secure wands and attachments.
Air flow regulator ring not included. |
|
|
| |
|
Model #: HP209
This stub tube is for the 3200 Series hose Low voltage and Dual Voltage hoses.
It has a button lock on one end to secure wands and attachments.
Air flow regulator ring not included. |
|
|
| |
 |
Model #: HP401
If you have the old style 3-prong cord these are no longer manufactured. To adapt your old system to the new 2-prong styled hoses simply insert this on your old cord and it will fit perfectly. These older styles were sold by Beam Rugmaster and Hoover. Measures 1 1/4 inches wide and 2 inches long.
If you need a new direct connect hose see our part #HO300
If you need a new corded hose see our part #HO301. |
|
|
| |
 |
Model #: HP301
This three way switch fits our Gas Pump style electric vacuum hose and comes complete with wiring harness and switch.
Fits our Gas Pump style handle part #HP200. |
|
|
| |
 |
Model #: HP302
This three way switch fits our Pistol style electric vacuum hose and comes complete with wiring harness and switch.
Fits our Pistol Grip style handle part #HP201. |
|
|
| |
 |
Model #: HP304
Switch Assembly for the 3200 Series Dual Voltage Hose.
This will not fit a Low Voltage Hose. |
|
|
| |
 |
Model #: HP207
Factory replacement switch for the XZ dual voltage hose.
If you need the complete handle and switch see our part #HP206.
|
|
|
| |
 |
Model #: HP303
Complete On/Off switch assembly for a Low Voltage vacuum hose. Not for use on electric hoses.
Fits our Low Voltage hose handle part #HP202. |
|
|
| |
 |
Model #: HP409
This factory replacement switch fits a 3200 Series Low Voltage Hose. Comes complete with circuit board and switch.
Does NOT fit the 3200 Series Dual Voltage hoses.
|
|
|
| |
 |
Model #: HP103
Repairs your direct connect vacuum hose. Has all the parts to complete the job and get you back up and running.
Comes complete with instructions and diagrams.
Requires Supervalve style electric valves, not low voltage inlet valves. |
|
|
| |
 |
Model #: HP102
This is a replacement for a corded style vacuum hose ends. Includes a new cuff, two fuse prong plugs and 8 foot cord.
Comes with complete instructions.
Fits our Corded Style Hose part #HO330. |
|
|
| |
 |
Model #: HP109
XZ Dual Voltage Vacuum Hose Wall End replacement kit for direct connect hose. Includes fuse, pins with wires, plug terminal, metal wire connectors, and wall end cover.
This fits the XZ hose only! See additional image below and compare it to your hose.
If you are looking for the XZ Dual Voltage Wall End replacement kit for the corded style hose see our part #HP110. |
|
|
| |
 |
Model #: HP110
XZ Dual Voltage Vacuum Hose Wall End replacement kit for corded style hose. Includes fuse, cord assembly, metal wire, terminal connectors, and wall end cover.
This fits the XZ hose only! See additional image below and compare it to your hose.
If you need the direct connect style wall end repair kit see our part #HP109. |
|
|
| |
 |
Model #: HP407
If you have a 3200 Series and XZ Dual Voltage Hose and need to replace the cord this is it.
Cord is 8 feet long and has the plug end for your 120 volt receptecle and the other ends attaches to the wall end of the hose cuff.
You may also convert a direct connect 3200 Dual Voltage Hose and XZ Dual Voltage Hose to a corded style if needed.
|
|
|
| |
 |
Model #: HP408
This is for a 3200 Series Dual Voltage Hose. Do you need to repair the wall end cuff or convert from a corded style hose to a direct connect style hose? This is the part you need to do so.
Contains all the parts you will need to do a repair or conversion.
|
|
|
| |
 |
Model #: HP115
This is a Beam factory Rugmaster hose repair cuff kit for the direct connect hose. |
|
|
| |
 |
Model #: HP116
This is a Beam factory Rugmaster hose repair cuff kit for the corded style hose. |
|
|
| |
 |
Model #: HP111
Hayden SuperHose male cuff plug. This male cuff plug is a Hayden factory repair part for the direct connect style Hayden SuperHose.
Please choose the color that matches your hose. Comes in ivory or grey. Sold individually. |
|
|
| |
 |
Model #: HP405
This female cord receptacle is positioned underneath the metal stub stub coming out of the handle end of your Hayden hose. This female receptacle accepts the male prong from the electrical cord coming up the wands from your power brush.
Comes in Ivory or Grey. Ivory shown. |
|
|
| |
 |
Model #: HP400
This cord provides an extra length if your power brush cord is a bit short and fails to reach your hose.
Fits into the cord channels of your wand and connects to most two pronged power brush cords.
Has a female and male end.
|
|
|
| |
 |
Model #: HP300
Replacement 3-way switch for a Hayden SuperPack vacuum hose. |
|
|
| |
 |
Model #: PB675
This is a factory replacement switch for a Nutone 549 electric hose. Nutone part #0937B000. |
|
|
| |
 |
Model #: HP105
Replaces standard diameter vacuum hose cuff with metal end. Very durable and is a swivel style to help keep your hose from kinking. This cuff holds up longer than regular metal banded style hose ends. For use only on standard hoses with no switch or wires.
Easy to install and tightens counter-clockwise. Secure it by using a dab of common household glue on the threads.
Comes in black, beige or grey. |
|
|
| |
 |
Model #: HP112
This hose cuff has a metal end that is 5.7 inches long and fits 1.25 inch diameter standard vacuum hoses. This also fits into the older style Nutone inlet valves that are also 1.25 inches in diameter.
Tapered at the metal end so it fits comfortably into your inlet valve. Can be installed on your 1.25 inch diameter hose by screwing the hose end which has reverse threading. To secure the hose end on the hose simply dab a bit of household glue on the threads and tighten gently.
Comes in grey only. |
|
|
| |
 |
Model #: HP100
Reduction cuff with 1.25 inch metal insert that goes directly into your inlet valve and the 1.5 inch end into your hose. For hoses that do not have a switch on the hose as well as corded style electric hoses. Electric hoses with corded style hoses will not be able to control the vacuum unit's On/Off capabilities, only the On/Off capability of the power brush.
Fits Sears/Kenmore, Nutone, Broan, Whirlpool, Black & Decker, Budd as well as many other systems. Easy to install, simply take the end of your hose and place it in hot water for about 1 minute then press the larger (1.5 inch) end into the hose. Tightens counter-clockwise and to secure it use a dab of common household glue on the threads.
Comes in black, grey or beige. |
|
|
| |
 |
Model #: HP113
This chrome metal tube is used to reduce your 1 1/2 inch hose to 1 1/4 inch. Use this to fit most 1 1/4 inch vacuum tools.
Measures 5 3/4 inches long. |
|
|
| |
 |
Model #: HP108
Hose cuff with metal band that fits our standard hose. Screws on with left hand threads and is used on inlet valves that are slightly smaller in diameter (1.5 inches or slightly smaller) such as early Nutone valves. Once installed the metal band comes in contact with the two small contact points in your inlet valve activating you vacuum system.
Available in black, grey or beige. |
|
|
| |
 |
Model #: HP101
Made of rubber this tapered cuff has reverse threads that screw on the end of your standard hose (no switch) and fits 1.5 inch or larger diameter inlet valves.
Fits Sears/Kenmore, Whirlpool, Black & Decker, Budd, as well as many other systems. Easy to install. Has reverse threads.
Available in black, grey or beige (black shown). |
|
|
| |
 |
Model #: PB617
These Hayden pigtail cords fit the Hayden SuperHose.
Comes in either 6 foot or 10 foot lengths.
Choose either Black or Grey colors. |
|
|
