Filter Bags & Cartridges

  Watch the TornadoPower Central Vacuum Cloths Video.

TORNADOPOWER central vacuum system maintenance cloths are the perfect way to care for your central vacuum system. These specially-formulated cloths reduce odors, maintain, and revitalize your entire central vacuum system, including inlets, piping, and the vacuum canister. The barbed side of the cloths gently scrub your vacuum hose and pipe while the smooth applies a fresh, clean scent to your entire system. Comes with 25 pre-moistened pop-up cloths that you can vacuum through each inlet valve using you hose and wands.

Here are some FAQ's:

Why should I use TORNADOPOWER cloths?

Your central vacuum system represents one of the most significant investments you will make in your home. In addition, it is also an important contributor to your family's health and well-being. With proper care, your central vacuum system should provide years of trouble-free use. TORNADOPOWER is one of the simplest and most effective ways to clean and maintain your central vacuum system.

What do TORNADOPOWER cloths do for your system?

TORNADOPOWER textured cloths are specially formulated to capture dirt and grime residue that exists in the hose and pipe of your central vacuum system. Also, when pulled through the pipe system, these cloths capture larger debris such as pebbles, lint, sticks, etc. and deliver these items to the canister. Finally, the treated cloths "wipe down" the inside walls of hoses and pipes, and their scented solution leaves the entire system smelling clean and fresh.

Can I leave TORNADOPOWER cloths in the dirt receptacle?

The use of TORNADOPOWER cloths should in no way alter the central vacuum system manufacturer's recommended filling intervals. Used cloths can be left in the dirt receptacle and will continue to emit a clean, fresh scent.

How often should I use the TORNADOPOWER cloths in my central vacuum system?

We recommend you use them every time you change filter bags or clean out your dirt receptacle or as often as you like to keep your vacuum system in great condition and smelling great too!

View the Testing and Troubleshooting Guide. (Adobe PDF)

This factory Hayden filter retainer is designed for use on most Hayden SuperVac systems. It holds the cartridge filter in place and the foam side helps seal it off from any leaks.

Measures about 4 7/8" in diameter.

If you need a replacement filter for your Hayden system see our part #FI900.

These are the Micro-Filtration 12 gallon filter bag and are the best filter to use if you have allergies or breathing problems and also assists in keeping your motor fan blades clean and free from dust thus preventing premature motor failure. These Micro-lined 2-ply filter bags and are made to factory specifications and filter down to .03 microns at 99.7% efficiency and using them will protect your warranty and replace the HyperFlow filter bags.

Fits Air Force, Silent Master, MD, Modern Day, FlowMaster, AirFlow, Stor-Vac. Compares to MD part #721-5, #721MC and #12MC paper filter bags.

Comes in a pack of 3 for your convenience. Bags measure 15 inches wide by 27.5 inches tall and has an elastic band at the top.

If you need the 8 gallon paper filter bags see our part #FI101.

Fits Filtex and Central Vac International units that use 9 gallon filters. The filters are 13 inches deep and are 13.5 inch diameter and have a cardboard ring around the top. Also may fit other applications for Central Vac International, and D & R vacuums. Check the measurements of you bag to be sure.

Comes 4 per pack.

If you need the Filtex 11 gallon bags see our part #FI103.

For Vacumaid 12 gallon systems using Microlined 2-ply bags.

Measures 25 inches long and 10 inches wide.

Comes 3 per pack.

If you prefer generic filter bags see our part #FI120.

These are genuine factory replacement filter bags. Eureka part #54585.

The bag is designed for Brute, Eureka Models 550, CV825, CV920, CV950, CV1001, CV1601, CV1804, CV1820, CV1851 and CV2301, CV4000, CV5000, CV6000, CV7000 systems.

Also fits some Beam models including BU165 and V165, Smart Vac 1601M and Frigidaire, Filteraire systems.

Bag is 23 inches long and 10 inches wide.

Comes 3 per pack.

These are factory WalVac filter bags. Bag is 15 inches tall and 21 inches in diameter.

Fits WalVac models 234, 235, 247, 325, 330, 350, 425, 465, 720, 721, 820, 834, 836 or others with this size bags.

Replacement for Wal Vac 57162 bags.

Also fits Black and Decker 719.

Comes 3 per pack.

Genuine VacuFlo filters fits VacuFlo Small Wonder RV systems #5100 and #6460.

Replaces filter bag #4908.

Comes 3 per pack.

Use ONLY this filter to maintain your warranty and receive maximum performance from your VacuFlo system.

NOT TO BE USED WITH CYCLONIC STYLE OR BAGLESS SYSTEMS. THIS WILL BLOCK YOUR MOTOR EXHAUST AND MAY DAMAGE YOUR SYSTEM!

It is best to change out the Centra Filter every three times you change you change out your filters or when the Centra Filter changes to a dark color. Help maintain a cleaner environment in and out of your home.

May require additional fittings such as a pipe coupling our part # PF109 or a 90 degree sweep elbow our part # PF102. Or you may use any fitting with a 2 3/16 outside diameter measurement.

CycloVac E-Series outer filters, pack of three. These are factory replacement outer filters.

If you need both the inner and outer filter please see our part #FI405.

You can replace your open bag filter system to a closed bag system by using this adapter and connecting it with part #PF105, 45 Degree Spigot "L".

This creates a sealed bag system that easier to remove and replace. No more dirty open filtered bags.

This is a factory replacement cloth filter bag for a Eureka Models CV1004B, CV1601M, CV1804B, CV107, CV137, and CV550.

Fits all Boss and Mega Boss vacuum systems.

Measures 13 inches wide and 10 inches deep.

For replacement paper filter bags see our part #FI109.

This is a factory replacement Teflon HEPA filter for the M Vac Models M7 and M8.

It is 11 inches wide and has a flexible ring for support.

If you are looking for a cloth filter for the M Vac M9 see our part I #FI408.

It measures 14 inches wide and 13 inches deep and is made of a heavy durable cloth.

This is the only replacement cloth bag approved by the manufacturer and will maintain your warranty.

Original 7 inch tall factory replacement filter for Vacuflo Models FC300, FC520, FC530, FC550, FC610 and FC650 systems.

Also fit Dirt Devil Pro Series models 390, 590, 690, 890, and 990 central vacuums.

Fits Dirt Devil models CV1800, CV2000, CV2200, CV2400 and CV2600 central vacuums.

Factory replacement for the Titan TCS-5525 central vacuum systems.

Measures 7 inches tall and 6 1/4inch wide.

If you are looking for replacement filter for Vacuflo Model FC1550 see our part #FI902.

CycloVac DL Series outer filters, pack of three. These are factory replacement outer filters.

If you need both the inner and outer filter please see our part #FI406.

Replaces factory part number 38763-006.

Factory quality replacement for M & S, Electrolux, Centralux, Broan, Aerus and Air Vac models AV400, AV410, AV480, VM110 and VM600 as well as some VM180 with foam filters. May also be used with similar measurements such as Hayden and Vent-A-Vac units.

If you are looking for the larger 8 x 8 foam filters see our part #FI705.

This foam filter is a genuine factory replacement for your Electrolux Central Vacuum System.

Measures 7 inches tall by 8 1/2 inches wide.