This is an Ametek Vacuum Motor for your Centralux, Electrolux E130A, Electrolux E130F, Electrolux E130G, CV3291 and may fit some Centralux and Electrolux model 1950's, 110-120 volt.
Please Note: The bottom of this motor is not flat and it tapers down over 1/2 inch. If your motor does not taper and is completely flat on the bottom you will need to order a different motor. You will need to order part #MO122. Replaces 6600-001 including HL10 P-9 ECD. Also, clip the wires from the old motor to splice into the new motor wires. You may need wire nuts and possibly washers to make up 1/8" difference on bolt threads when tightening.
It is suggested you replace the motor gasket part #MO512.
Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.
Uses motor brushes part #MO523. | 
