This is an Ametek Vacuum Motor for your Centralux, Electrolux models E130A, E130F, E130G and CV3291 and may fit some Centralux and Electrolux model from the 1950's, 120 volt.
Please Note: The bottom of this motor is not flat, it tapers down over 1/2 inch. If your motor does not taper and is completely flat on the bottom you will need to order a different motor. You will need to order part #MO1084.
Replaces 6600-001 including HL10 P-9 ECD. Also, clip the wires from the old motor to splice into the new motor wires. You may need wire nuts and possibly washers to make up 1/8" difference on bolt threads when tightening.
It is suggested you replace the motor gasket part #MO512.
Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.
Uses motor brushes part #MO523.