Cartridge Filters

  Watch the TornadoPower Central Vacuum Cloths Video.

TORNADOPOWER central vacuum system maintenance cloths are the perfect way to care for your central vacuum system. These specially-formulated cloths reduce odors, maintain, and revitalize your entire central vacuum system, including inlets, piping, and the vacuum canister. The barbed side of the cloths gently scrub your vacuum hose and pipe while the smooth applies a fresh, clean scent to your entire system. Comes with 25 pre-moistened pop-up cloths that you can vacuum through each inlet valve using you hose and wands.

Here are some FAQ's:

Why should I use TORNADOPOWER cloths?

Your central vacuum system represents one of the most significant investments you will make in your home. In addition, it is also an important contributor to your family's health and well-being. With proper care, your central vacuum system should provide years of trouble-free use. TORNADOPOWER is one of the simplest and most effective ways to clean and maintain your central vacuum system.

What do TORNADOPOWER cloths do for your system?

TORNADOPOWER textured cloths are specially formulated to capture dirt and grime residue that exists in the hose and pipe of your central vacuum system. Also, when pulled through the pipe system, these cloths capture larger debris such as pebbles, lint, sticks, etc. and deliver these items to the canister. Finally, the treated cloths "wipe down" the inside walls of hoses and pipes, and their scented solution leaves the entire system smelling clean and fresh.

Can I leave TORNADOPOWER cloths in the dirt receptacle?

The use of TORNADOPOWER cloths should in no way alter the central vacuum system manufacturer's recommended filling intervals. Used cloths can be left in the dirt receptacle and will continue to emit a clean, fresh scent.

How often should I use the TORNADOPOWER cloths in my central vacuum system?

We recommend you use them every time you change filter bags or clean out your dirt receptacle or as often as you like to keep your vacuum system in great condition and smelling great too!

View the Testing and Troubleshooting Guide. (Adobe PDF)

Original 7 inch tall factory replacement filter for Vacuflo Models FC300, FC520, FC530, FC550, FC610 and FC650 systems.

Also fit Dirt Devil Pro Series models 390, 590, 690, 890, and 990 central vacuums.

Fits Dirt Devil models CV1800, CV2000, CV2200, CV2400 and CV2600 central vacuums.

Factory replacement for the Titan TCS-5525 central vacuum systems.

Measures 7 inches tall and 6 1/4inch wide.

If you are looking for replacement filter for Vacuflo Model FC1550 see our part #FI902.

Replaces factory part numbers 8744-00MTMH and 8744-00-WSH.

If you need the retainer to hold the filter in place see our part #FI908.

The cone shaped corrugated filter #5404004100 is a factory replacement for VacuQueen, FilterQueen, Health-Mor and MHI central vacuums.

Fits all the V1000 - V3000 series Vacu-Queen or FilterQueen Central Vacuum Systems manufactured by HMI.

Be sure to only use factory replacement filters only to maintain your warrantyand the best perfomance from your system.

These are factory replacement Carbon Dust Motor Filters for the PowerStar Optima Plus and Utopia central vacuum systems. In addition they fit the CycloVac GS and GX Series central vacuums.

Change your Carbon Dust Motor filter once for every three filter bags you change. It traps that harmful carbon dust produced by the motors that is normally deposited on surfaces around the power unit. Its pleated design provides a substantial filtration surface, allowing for a maximum coverage and filtration durability as well as protecting the environment.

Filter measures 5 1/2 inches long, 2 inches wide, and 3/4 inches deep.

Comes two per pack.